Practice with a MIDI keyboard

Use a connected keyboard to match the notes shown in the practice workspace. Set up MIDI input, check the first notes and troubleshoot a keyboard that is not responding.

Start practicing
  1. 01Choose your music

    Start with a short score or passage.

  2. 02Connect and check

    Allow MIDI access, then try one note.

  3. 03Practice a phrase

    Repeat a small section before moving on.

Connect the instrument before starting

Connect a MIDI-capable keyboard to your device using an appropriate data connection. Turn the keyboard on, then open a supported score in practice. A charging-only cable may supply power without carrying MIDI data. Check the instrument’s own instructions if its USB port or operating mode is unclear.

Allow MIDI access in the browser

Choose Connect MIDI when the practice workspace offers it and approve the browser’s MIDI request. Availability depends on browser support and device access. If the control is unavailable, use the on-screen keys or try a browser with Web MIDI support. Microphone permission is separate and is not required for MIDI input.

Check one note before a full piece

Start with a simple sample and press the highlighted note on your keyboard. Watch whether the score advances. If the letter is correct but there is no match, check the octave and whether the keyboard is transposing its output. A split or layered keyboard setup may send additional notes, so begin with a straightforward instrument configuration.

Play chords together

When the score asks for a chord, play the target notes together. Work with one staff first if coordinating both hands is difficult. The hand controls select the score’s upper or lower staff; they do not change what your keyboard physically sends. Release the keys cleanly between attempts so that a held note does not confuse your next entry.

Separate note input from sound

MIDI carries note messages rather than a microphone recording. Successful input matching does not itself prove that your instrument’s speakers, headphones or browser audio are configured correctly. Use the instrument’s normal audio controls for its sound, and use TuneViva’s Play control when you want to listen to score playback.

If the keyboard does not respond

Check power, the data cable and browser permission first. Reconnect the device and try Connect MIDI again. Close another application if it appears to be holding exclusive access to the instrument. Test the on-screen keyboard to distinguish a score problem from an input problem. If the on-screen notes advance but the physical keys do not, focus on the device connection and MIDI setup.

Related guides

Common questions

Do I need microphone permission to practice with MIDI?

No. MIDI access and microphone access are separate. A MIDI keyboard sends note events directly rather than recording sound through a microphone.

Why is Connect MIDI missing in TuneViva?

MIDI availability depends on the browser and device access. Use the on-screen keyboard when MIDI is unavailable, or try a browser that supports Web MIDI.

Why does the right note name fail to advance practice?

Check the octave, keyboard transposition and any other notes required by the highlighted chord. A matching letter in a different octave is a different pitch.

Can I practice MIDI chords one note at a time?

Play the highlighted chord notes together with MIDI input. To simplify the passage, select one staff when the score arrangement supports that approach.

Does MIDI record the sound of my piano?

No. MIDI communicates events such as notes being pressed and released. Microphone input is a different mode that listens to audio.

Further reading

Put it into practice

Start practicing →